Instructions / Assembly

• Heater is on a hard and level surface.

• There are no signs of spider or insect nests.

• All burner passages are clear.

• All air circulation passages are clear.

• Children, pets, clothing, flammable materials and items that can be damaged from

radiant heat are away from the heater.

• Children and adults in the area have been alerted to the high temperature hazards;

especially burns and clothing fires.

• Children and adults in the area have been warned not to touch heater near emitter

during operation and until unit has cooled completely.

OPERATION

Inspect the heater before each operation.

Before Turning Gas Supply ON

Your heater was designed and approved for OUTDOOR USE ONLY. DO NOT use it

inside a building, garage or any other enclosed area.

Make sure surrounding areas are free of combustible materials, gasoline and other

flammable liquids.

• Ensure that there is no obstruction to air ventilation.

• Be sure all gas connections are tight and there are no leaks.

• Be sure the access panel is clear of debris

• Be sure any component removed during assembly or servicing is replaced prior to

starting.

Before Lighting

Heater should be thoroughly inspected before each use and by a qualified service

person at least annually.

If relighting a hot heater, always wait at least 5 minutes for gas to dissipate.