Instructions / Assembly

TROUBLESHOOTING
PROBLEM PROBABLE CAUSE SOLUTION
Pilot will not light
Fuel canister empty Replace fuel canister
Opening blocked Clean opening
Air in supply system Purge air from system
Loose connections Check all fittings
Pilot will not stay on
Debris around pilot Clean dirty area
Loose connections Tighten connections
Gas leak Check connections
Lack of fuel pressure Canister near empty.
Replace fuel canister.
Burner will not light
Pressure is low Canister near empty.
Replace fuel canister.
Opening blocked Remove and clean
Control not ON Turn knob to ON
Pilot light assembly bent Place pilot properly
Not in correct location Position properly and retry
12