Outdoor Patio Heater INFRARED BURNER Model # LIP-10A-TGG-NTS-1 Item # 61445 ATTACH YOUR RECEIPT HERE Serial Number ___________ Purchase Date ________ Manufacturer: Changzhou Wellife Furnace Co., Ltd. Questions, problems, missing parts? Before returning to your retailer, call our customer service hotline at 1-866-985-7877, 9 a.m. – 6 p.m., EST, Monday – Friday or email at cservice@welltraveled.net.
TABLE OF CONTENTS Table of Contents………………………………….....................Page 2 Before You Begin............................................................Page 2 Safety Information.........................................................Page 3-4 Package Contents………………………………….....................Page 5 Hardware Contents..........................................................Page 6 Assembly.........................................................................Page 6-11 Operating Instructions……………......
SAFETY INFORMATION 3
SAFETY INFORMATION 4
PACKAGE CONTENTS ASSEMBLY PART 5 DESCRIPTION QTY 4 pcs (packed in 2 inner ctns) A Reflector Panel B Reflector Center Cap 1 C Head Assembly 1 (packed in 1 inner ctn) D Main Post 2 E Gas Hose 1 (attached to Head Assembly) F Lower Post 1 G Base 1 H Base Cover 1
HARDWARE CONTENTS ASSEMBLY ASSEMBLY PREPARATION Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package contents list and hardware contents as listed on pages 5 and 6 of this manual. If any part is missing or damaged, do not attempt to assemble this product. Contact customer service for replacement parts.
ASSEMBLY 1. To protect your heater from strong winds, it is best to anchor the base securely to the ground. There are two methods you may use to secure the base. OPTION A (for solid ground such as concrete): 1-A Using the holes in the Base as a template, drill 4 - 12.5-13mm diameter holes (1/2") that are at least 300mm (4") deep. Fig. 1 Then insert the Expandable Bolts (4 pcs) into the holes. Fig. 2 Slide the Base down over the Expandable Bolts. Fig.
ASSEMBLY 2. Once you have affixed the Base by one of the options above, slide the Lower Post (F) down over the Base (G). Align the holes in the Lower Post with the holes in the Base and insert 6 - M6x12 Bolts through Lock Washers and into the holes and hand tighten. 2 Hardware Used: 6 - M6x12 Bolt with Lock Washer 3. Slide the Base Cover (H) over the Lower Post (F) and Base (G). 3 4. Screw the two pieces of the Main Post (D) together. Then screw the Main Post (D) onto the Lower Post (F).
ASSEMBLY 6. Attach Head Assembly (C) to Main Post (D). Note: There is a small piece of protective foam located in the neck of the Head Assembly that MUST be removed prior to attaching Head Assembly to the Upper Post. Route Gas Hose (E) down into Main/Lower post assembly and align 4 small holes on Head Assembly with 4 Small holes in Main Post (F). [HINT: Control knob should be above decal on post.] Insert 4 M6x10 (FF) bolts through 4 M6 lock washers into holes and tighten.
ASSEMBLY 8. While supporting heater, tilt the Head Assembly (C) and slide the assembled Reflector over the 3 bolts that extend from the Head Assembly. Use 3 M8 Wing Nuts and 3 M8 Washers to secure the assembled Reflector to the Head Assembly of the heater. Once you have tightened the Wing Nuts, return the heater to an upright position. Hardware Used: 3 - M8 Wing Nuts 3 - M8 Washers 8 9. Connect the hose and regulator (from natural gas company) to the natural gas outlet.
ASSEMBLY A minimum supply pressure of 7” W.C. is required for the purpose of input adjustment of natural gas. Storage of an appliance indoors is permissible only if the source is disconnected and removed from the appliance. A gas source must be stored outdoors in a well-ventilated area out of the reach of children. A disconnected gas source must have dust caps tightly installed and must not be stored in a building, garage, or any other enclosed area. The minimum permissible gas supply pressure of 7” W.C.
OPERATING INSTRUCTIONS 3. If leak is detected at regulator/gas source valve connection, disconnect, reconnect, and perform another leak test. If you continue to see bubbles after several attempts, call our customer service hotline at 1-866-985-7877, 9 a.m. – 6 p.m., EST, Monday – Friday IF NO BUBBLES APPEAR AT ANY CONNECTION, THE CONNECTIONS ARE SECURE. Note: Whenever gas connections are loosened or removed, you must perform a complete leak test.
OPERATING INSTRUCTIONS When Heater is ON: Emitter screen will become bright red due to intense heat. The color is more visible at night. Burner will display tongues of blue and yellow flame. These flames should not be yellow or produce thick black smoke, indicating an obstruction of airflow through the burners. The flame should be blue with straight yellow tops. If excessive yellow flame is detected, turn off heater and consult “Troubleshooting” on page 15.
OPERATING INSTRUCTIONS After Operation: 1. Gas control knob is in OFF position. 2. Gas valve is OFF. 3. Disconnect gas line. CARE AND MAINTENANCE To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities on a regular basis: Keep exterior surfaces clean. 1. Use soapy water for cleaning. Never use flammable or corrosive cleaning agents. 2.
TROUBLESHOOTING If you have any questions regarding this product, please call our customer service hotline at 1-866-985-7877, 9a.m. – 6 p.m. (EST), Monday – Friday, or email us at cservice@welltraveled.net. PROBLEM POSSIBLE CAUSE Gas valve may be off Turn gas valve ON Orifice blocked Clean or replace orifice Air in supply system Purge air from lines. Open gas lines and depress control knob for 2-3 mins.
REPLACEMENT PARTS LIST ASSEMBLY For questions regarding this product or to purchase replacement parts, please call our customer service hotline at 1-866-985-7877, 9a.m. – 6 p.m. (EST), Monday – Friday, or email us at cservice@welltraveled.net.
Distributed By: Well Traveled Living 716 S 8th Street Amelia Island, FL 32034 Toll Free: 866-WTL-SUPP (866-985-7877) Web: www.wtliving.com Email: cservice@welltraveled.net 1 YEAR LIMITED WARRANTY – Customers in the Continental US All components are warranted for a period of 1 year after date of purchase by the original owner against defects in materials and workmanship under normal use.
