User Guide

3
General Information
Fireboy Automatic (CG series) and Manual/Automatic (MA) series Fire
Extinguishing Systems are manufactured for a broad range of applications,
including marine, industrial, and commercial uses. This booklet is intended to
outline the proper installation of the system for marine applications; most
applications are similar. If further technical advice is required, information is
available by writing or calling Fireboy-Xintex.
Fireboy FE-241 Systems are approved for use in unoccupied areas, and are not
approved for use within the European Union.
Fireboy FM Component Approved HFC-227ea Systems are approved for use in
occupied areas and are approved for use within the European Union.
MSDS Sheets are available at no charge from the manufacturer and online at
www.fireboy-xintex.com.
The National Fire Protection Agency defines normally occupied areas as “one
that is intended for occupancy.” (NFPA-2001:20049).
WARNING:
Fireboy systems are not, nor are they intended to be, explosion suppression
devices. They do not lessen the need to inspect for fire hazards and to ventilate
any area where flammable fumes may accumulate.
Referenced Agencies:
Bureau Veritas
3663 N. Sam Houston Pkwy. E., Suite 200
Houston, TX 88034
National Fire Protection Agency
1 Batterymarch Park
Quincy, MA 02269-9101
NFPA 2001, Standard on Clean Agent Fire Extinguishant Systems
FM Approvals
1151 Boston Providence Turnpike
Norwood, MA 02062
United States Coast Guard
2100 Second Street SW
Washington, DC 20593-0001
RINA
10 Upper Belgrave Street
London, SWIX 8BQ