Use and Care Manual
FUN Pit Assembly Instrucons
Please ensure that you have the following in the box:
(4) side panels (4) L brackets
(4) corner pieces (24) 1/4” carriage bolts and (24) 1/4” nuts
(4) U brackets for accessory use with (8) 1/4” nuts and bolts
Step 1: Aach L brackets to each side
panel as shown
Step 2: Connect other end of panel
to other side of L bracket as shown
Note: Do not ghten bolts unl assembly is
complete
Note: Do not ghten bolts unl assembly is
complete
Step 3: Aach corner pieces with
hardware as shown
Note: You may now ghten all hardware
Step 4: Install U bracket for accessories
in middle of each panels with (2) 1/4” nut
and bolt
Ensure large hole in U bracket is installed in line with the hole in the top ange
Each FUN Pit includes (4) U brackets for accessory use but can accommodate up to (12) U brackets that
are sold separately. You can place the U brackets into any of the (6) hole locaons in the side panel.
Please call 763-263-0115 with quesons or concerns or via email at sales@rebuggz.com
Do not return items to store