- Fireplace Xtrordinair Built-In Direct Vent Fireplace Installation Manual

Optional Equipment (for qualified installers only) 61

Install the air duct. Each section, when joined, must be attached with three screws and aluminum

duct tape (U.L. 181A-P or equivalent). Secure the duct if it is in an area where it may sag or

become dislodged.

NOTE: The air duct has a 0” clearance to combustibles.

Secure all ducting

together with screws.

Then seal the seams

with aluminum duct

tape (U.L. 181A-P or

equivalent).

Attach the grill (and wall adapter, if necessary).

Grill

Wall Adapter

(for use when the blower box

protrudes from the wall -

primarily on 2 x 4 walls)

Phillips

Screwdriver

Screws

(included with

this kit)