SDS

Global Harmonized System
FR-10 Clear Flame Retardant Semi-Gloss Coating
www.firetect.com | Firetect™, Inc. 28298 Constellation Road, Valencia, CA 91355
1/5/2018 Page 3 of 3
Chemical stability Stable.
Incompatible materials Reacts with strong oxidizing agent such as hydrogen peroxide,
permanganates and perchlorates.
Decomposition materials CO2, CO, HCL and smell of aromatic alphatic
hydrocarbons from burning dry powder.
11. Toxicological information
Acute toxicity
Potential health effects
Inhalation May be harmful if inhaled. Short-term exposure may cause irritation of nose,
throat and lungs.
Eyes/Skin May be harmful in contact with eyes/skin. Short-term exposure may cause
irritation.
Ingestion May be harmful if swallowed. Possible stomach irritation and nausea.
12. Ecological information
Ecotoxicity No data available.
Persistence and degradability No data available.
Bioaccumulative potential No data available.
Mobility in soil No data available.
Other adverse effects No data available.
13. Disposal considerations
Waste disposal of product Squeegee into container or absorb with sand or sweeping compound. Solids
can separate from liquid latex through coagulation by the addition of alum.
Place solids into a container for proper disposal in accordance with local state
or federal regulations.
Contaminated packaging Dispose of in accordance with federal, state, and local regulations.
Container disposal Plastic pails are recyclable. Rinse well before recycling or disposal. Dispose of in
accordance with federal, state, and local regulations. Contact local authorities
for further information.
14. Transport information
Land transport
USDOT Non-hazardous product. Not regulated.
Marine transport
IMDG Non-hazardous product. Not regulated.
Air transport
IATA Non-hazardous product. Not regulated.
15. Regulatory information
Additional safety, health Not applicable.
and environmental regulations
16. Other information
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200 and prepared to GHS.
Preparation information
Prepared by Firetect ®, Inc.
Disclaimer It is the user’s responsibility to ensure safe conditions for
handling, storage and disposal of the product, and to assume liability for loss,
injury, damage or expense due to improper use. The information given is
presented in good faith and believed to be correct as of the date hereof, based
on available data, material components, and similar materials. Firetect®, Inc.
cannot anticipate all conditions under which this information and its product,
or the products of other manufacturers in combination with its product, may
be used.