User's Manual

20 Wireless Access Point User Guide
Understand Advanced Settings
Intracell Blocking
Intracell blocking allows you to prevent users of a given VAP from seeing
each other. When enabled, all users can use the AP to reach the network,
but no user can access other computers on that VAP.
Note Intercell blocking is accomplished with VLANs.
User Data Rate
In order to prevent one user from consuming excess bandwidth on the
backbone, you can limit the data rate for each user. You can also limit the
aggregate rate for each VAP Group.
IAPP and Roaming
The Inter-Access Point Protocol describes an optional extension to IEEE
802.11 that provides wireless access-point communications among multi-
vendor systems. If you have other APs which support it, you can enable its
operation and set the port used for control.
WMM
WMM, also known as WME, allows clients which support the Wireless Mul-
timedia Extensions protocol to prioritize VoIP and video traffic. If your cli-
ents support it, enable it here.