User's Manual

HotPoint Wireless Access Point 23
Performance
Up to 54 Mbps
Up to 64 concurrent users simultaneously per HotPoint
Inter Access Point Protocol (IAPP) enabled per 802.11f
Fast handoff enabled, per 802.11r draft recommendation
Intercell blocking – blocks communication between APs
Intracell blocking – blocks communication between BSSIDs
Auto discovery
Configurable web portal
Broadcasted advertising
No user configuration
Network Port
One 10/100 Base-T (RJ-45) ports IEEE 802.3, 802.3u compliant
CSMA/CD 10/100 auto-sense
Indoor Unit - Power
Input voltage: 5 VDC @ 2.0 A
External power supply: 100-240 VAC, 50/60 Hz
Power consumption: 10 W
Outdoor Unit - Power
Input voltage requirement: 5 VDC @ 2.0 A
PoE-compatible - will operate PoE supplied by Firetide 3200/3600 Series
Outdoor Mesh Router
Optional external power supply: 100-240 VAC, 50/60 Hz
Power consumption: 10 W
Indoor Unit Enclosure
System indicator LEDs (power, status, mesh, fault)
Ethernet indicator LEDs (link status, activity)
Two antenna connectors: SMA, reverse polarity
Power connector
One Ethernet data connectors (RJ-45)
Reset button (recessed)
Security slot for physical locking device
Weight: 2.1 lbs (.95 Kg) without external transformer
Dimensions: 9.00 in x 5.84 in x 1.07 in (22.85 cm x 14.83 cm x 2.71 cm)
Outdoor Unit Enclosure
NEMA-rated die-cast aluminum
Two antenna connectors, type N
Weatherproof power connector
Weatherproof Ethernet connector
Regulatory agency certifications
Plenum rated UL2043
FCC Part 15
Environmental specifications
Operating temperature: -20º C to +60ºC
Storage temperature: -20º C to +70º C
Humidity (non-condensing): 10% to 90%
Storage humidity (non-condensing): 10% to 90%