User's Manual
Table Of Contents
July 2011 Firetide. Reliable Connectivity Anywhere. 17
Next, fabricate a weatherproof Ethernet connector. Thread the cable as shown, and then attach it to the
FWB-205 radio unit.
Figure 10. Ethernet Cable Fabrication
Antenna Alignment
After physical installation, the antennas should be aligned. You and a co-worker will need to work to-
gether; one at each end. Log into the FWB-205 pair and bring up the alignment screen, as shown.
Alignment is on by default. To insure maximum performance, turn off the alignment feature after align-
ment is complete.
Refer to “Chapter 3 Radio and System Settings” on page 9 for other software conguration options.