Product Overview

1
®
MicroM
OPTIONAL
PLUG-IN BOARDS
MED SERIES
OPTIONAL PLUG-IN BOARDS
Description
The MicroM provides remote reset, remote alpha-numeric display, and serial communications as
stand-alone or in combination through the employment of optional boards. Refer to ORDERING
INFORMATION for MicroM Chassis types for units that have pre-installed functions.
FIGURE 1. PLUG-IN BOARD LOCATION AND INSTALLATION
Installation
For upgrading standard units or for replacing the installed plug-in board, grasp plug-in board at the
top and pull away from the chassis, freeing the unit from the retaining standoff. Lift plug-in board up
and away from connector located on chassis board. Guide new plug-in board into the same connector
and push onto standoff.
Install dust cover with shroud to accommodate external wiring.
Refer to bulletin MC-5000 for a complete description.
STANDOFF
PLUG-IN BOARD
MED SERIES
RELEASE
DIRECTION
WARNING: Disconnect power before servicing.
SERIAL COMMUNICATIONS
A
B
REMOTE DISPLAY
RJ45 JACK
REMOTE RESET
MOPT1
MAY 2, 2005
APPROVED