Product Overview

4
INSTALLATION
The amplifier modules are used with the Fireye Modular
MicroM Base Chassis (P/N MEC120, MEC120C,
MEC120R, MEC120D, MEC120RC for 120VAC, P/N
MEC230, for 230VAC). They are installed in the chassis
by grabbing hold of the amplifier module by the edges of
its printed circuit board, aligning the module with the
guide slots on the opening in the middle of the chassis,
and inserting the module into the pin connectors.
The amplifier modules are designed to fit in the proper
slot only.
DO NOT FORCE THEM.
WARRANTIES
FIREYE guarantees for
one year from the date of installation or 18 months from date of manufacture
of its products to
replace, or, at its option, to repair any product or part thereof (except lamps, electronic tubes and photocells) which is found
defective in material or workmanship or which otherwise fails to conform to the description of the product on the face of its
sales order.
THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES AND FIREYE MAKES NO WAR-
RANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED.
Except as specifically
stated in these general terms and conditions of sale, remedies with respect to any product or part number manufactured or sold
by Fireye shall be limited exclusively to the right to replacement or repair as above provided. In no event shall Fireye be liable
for consequential or special damages of any nature that may arise in connection with such product or part.
0
1
2
3
4
5
6
7
8
9
10
11
12
6 16202428323640
CORRELATION BETWEEN
AMPLIFIER TEST JACK
VOLTAGE AND OPTIONAL
ED510 REMOTE DISPLAY
FLAME SIGNAL READING
ED510 DISPLAY FLAME SIGNAL
AMPLIFIER TEST JACK VOLTAGE
FIREYE
MAMP-1
3 Manchester Road JANUARY 2000
Derry, New Hampshire 03038 USA Supersedes Nov. 1998
http://www.fireye.com