General Version for Ceiling Mounted Fan Lights Ceiling Fan Installation Instructions Retain this manual for future use We appreciate the trust and confidence you have placed in us through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home.
Table of contents Table of contents 1 Safety Precautions 2 Warranty 3 Pre-Installation Tools needed 3 Installation kit 4 Specification 5 Installation Step 1 (Ceiling bracket installation ) 6 Step 2 (Receiver and wiring installation) 7 Step 3 (Light kit installation) 9 Step 5(Switch on and ceiling fan works) 10 Remote Control ( Emitter ) Operation 11 TroubleShooting 12 .1.
Safety Precautions The information contained in the following pages has been prepared to ensure your maximum enjoyment of your fan Please remove the fuse or turn off the circuit breaker to cut off the power before installing the fan. Ensure all electrical connections are in compliance with local laws, regulations and national eletrical codes. If you are not familiar with electrical installation and wiring, please hire a qualified electrician or consult the wiring manual. 1.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation Installation kit AA Part AA BB CC DD BB CC Description Blade attachment screw with lock washer Wire nut Screws A Screws B .4.
Pre-Installation Specification A E F B 2 1 3 6 4 5 Z Z Z 1H G 3H 6H C H D Part Description Quantity A Bracket 1 B Body/motor 1 C Light kit 1 D Light cover 1 E Blades 3 F Receptor 1 G H Remote control Battery Excluded 1 2 .5.
Installation Step 1 (Ceiling bracket installation and fan into the installed Bracket.) ① Turn off the fan power supply at the circuit breaker box and the wall switch. OFF ② Choose the following installation methods according to the actual situation of the roof. ACCEPTABLE FOR FAN SUPPORT Electrical Outlet Box or Solid wood roof .6.
Installation Step 2 (Wiring and fan into the installed Bracket.) ① Connect the wires according to the polarity (the color of the House power cord may be different if the color is the same). House power wire Intput wire For light To motor Output Wire two separated pre-lock ③ Remove screws from Bracket, and loosen the the receiver into the Bracket and ② Put arrange the wires other two (no need to take them out) take out .7.
Installation ④ Remove the body from the Bracket hook, lift and rotate the it to make the seven-character slot of the body is hung on the two nails on the Bracket ⑤ Tighten the screws .8.
Installation Step 3 (Blades and Light kit installation) ① Align the connected blade with the mounting hole, and then fix it with screws. ② Remove the pre-installed screws. Connect the light kit cable, and then lock the light kit.(1073-3 N invalid) Lighting kit Insert .9.
Installation ③ Installation of light cover (1073-3 N invalid) Step 4(Switch on and ceiling fan works) ON 2 3 1 4 6 5 1H Z Z Z 6H 3H .10.
Remote Control ( Emitter ) Operation If emitter can not control the fan 1. Please check whether the battery is installed correctly and whether it is charged. If necessary, replace the remote control battery. 2. Please check if there are similar remote control products working nearby, because remote control products of the same frequency will interfere with each other. 3.
TroubleShooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. .12.
Quic k Answ e rs t o c om m on Que st ions __________________________________________________________________________ 1. Can the light and fan work separately? Like, can I turn on just the fan without turning on the light and vice versa? Yes,the light and the fan can work separately,controlled by remote control 2. How do you change the blade speed, I cannot get it to change? Use the remote control. Level 1-6 speed adjustment by press 1-6 button. 3.
