MSDS

KunLun TianRun KR5（Economical and high quality Gasoline ） Page3of5

to avoid mixing with water and impurities and other foreign matter. The storage area should

be equipped with the necessary fire equipment, leakage processing equipment. Empty

containers may still remain product, avoid heating, cutting, welding.

Section 8 Exposure Control/Personal Protection

Exposure limits: When mists can occur, the following are recommended: 5 mg/m³ - ACGIH

TLV, 10 mg/m³ - ACGIH STEL.

Engineering Controls: No special requirements under ordinary conditions of use and with

adequate ventilation

Eye Protection: If contact is likely, safety glasses with side shields are recommended.

Hand Protection: Wear suitableoil-resistant protective gloves made by Nitrile rubber or high

quality PVC.

Skin and Body Protection: Wear protective clothing if there is a risk of skin contact

andchange them frequently, or when contaminated.

Respiratory Protection: use engineering controls to maintain adequate ventilation and avoid

oil mist. If engineering controls do not maintain airborne contaminant concentrations at alevel

which is adequate to protect worker health, an approved respirator may be appropriate.

Recommend wearing purifying dust or mist particulate air-purifying respirators or

self-contained breathing apparatus.

Section 9 Physical and Chemical Properties

Typical physical and chemical properties are given below. Consult the Supplier in Section 1

for additional data.

Appearance: Transparent Liquid

Odor: Characteristic, nonirritant

Density(kg/m

, 20℃): 840-900

Flash Point (COC, ℃) : >205

Solubility: Insoluble in water, soluble in alcohols, ethers, ketones, grease, hydrocarbons, most

of the organic solution

Section 10 Stability and Reactivity

Stability:Stable at normal conditions

Avoid:Excessive highly oxidizing agents.

Avoid condition: Open flame, high heat resource

Hazardous: Product does not decompose at ambient temperatures.

Decomposition Products: Material does not decompose at ambient temperatures.

Decomposition Products: Polymerization will not occur