FIREMAN @ Intertwine 5881841 OWNER’S MANUAL PORTABLE GENERATOR MODEL NUMBER Rev Laverne IMPORTANT:Read all safety precautions and instructions carefully before operating equipment. tT Ensure engine is stopped and level before performing 2. any maintenance or services. Record product information to reference when ordering parts or obtaining warranty coverage.
Tale ni Contents Introductions, Safety Precautions . Unpacking the Generator. Parts included Removal of Shipping Supports . Controls and Features. Generator Control Panel. Specifications. Add Engine Oil... Low Oll Shutdown Add Fuel Operation at High Altitude Grounding. Consoling to a Building's Electrical Bystander. Operation . Generator Location Surge Protection... Starting the Generator Conn acting Electrical Loads Stopping the Engine Low Qi Shutdown Du Not Overload Generator . Enhancement And Storage. .
RETROSPECTION Thank you for purchasing 2 FIREMAN generator. This manual contain safety information to make you aware of the hazards and risks associated with generator products snd how to avoid them, This generator is designed and intended only for supplying electrical power for operating compatible electrical lighting, appliances, tools and mayor loads, and is not intended for any other purpose.
SAFETY PRECAUTIONS A DANGER sig 8 generator indoors GAN ILL YOU 13 MINUTES. Generator axes contention pasha menageries. This Ia = prison you cannot ass of aim. Fl ey NEVER usa Inside s hoot | Duty wen OUTSIDE and or guns, EVEN IF doers | Sar sey from windows, are windows ave spe. dua, std vats. wid other narrators hazards. READ MANUAL BEFORE LSE. POISONOUS GAS HAZARD, Engine exhaust contains carbon monoxide, 8 poisonous gas that could kill you in minutes. You CANNOT smell it, see it, or taste it.
CORRECT USAGE Examples locution to reduce risk of carbon monoxide poisoning ® ONLY use outside and downwind, far away from windows, doors and vents, @ Direct exhaust away from occupied spaces. = ams can awe > Dir rest exhaust Indy use SEEDBED snd HAY Fran ¢ BRAY from windows, — ho 3 doors snd varies.
Starter cord kickback {rapid retraction) will pull hand and arm toward engine faster than you can fet go which could cause broken bones, fractures, bruises, or sprains resulting in serious injury. @ When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback. @ NEVER start or stop engine with electrical devices plugged in and turned on.
@ When using generator for backup power, notify utility company. ® Use a ground fault circuit interrupter (FACT) in any damp or highly conductive area, such as metal decking or steel work. @ DO HOT touch bare wires or receptacles. @ DO NOT use generator with electrical cords which are worn, frayed, bare of otherwise damaged. ® DO NOT operate generator in the rain or wet weather.
HOT Improper stuntman of generator could damage it snd shorten its life, ® Use generator only for intended uses. ® If you have questions about intended use, ask denier or contact local service center. @ Operate storage only on level surfaces. ® DO NOT expose generator to excessive moisture, dust, dirt, or corrosive vapors. ® DO NOT insert any objects through lancing slots. @ If connected devices overheat, turn them off and disconnect them from generator.
REMOVAL OF SHIPPING SEAPORTS Before you can run your new generator, follow 1 Before filing the engine oil, tip the generator these simple Instructions: back onto its recoil frame end as Indicated in this picture. Place the generator on the flattened The following rems must ba removed before gor other protective surface. running your new generator.
1 Fuel Gauge 8 Bottle Opener 25.0 Gallon Capacity Fuel Tank oil Filler Cap 3 Fuel Cap dutiable Cover 4 Choke Aver control Panel §Fuel Valve §Alr Filter 7208¢cc FIREMAN OHY Engine 8 Recoil Starter *We are always working to improve our products, Therefore, the enclosed product may differ slightly from the image on this page.
Total power drawn from all precipices must not succeed the name plates rating. § Engine Switch Flip the switch to the ON()” & 120%, 30A RV (NAME RT-308) position and pull the recoil starter to stat the generator. Turn to the "OFF(0)" position to turn off the generator. © 4-1 Mater) Push the SELECT button to show the Voltage, Hertz and sunning hours. If the low ofl indicator is |, check the oil level.
SPECIFICATIONS Bode! POISE Starting Watts 4550 Running Watts 2650 Rated AC Voltage 120/240 Rated Frequency #0Hz Phase Single Voltage Regulator AVR Power Factor 1 Total Harmonic Distortion} Standard Alternator Type Brushed Engine FIREMAN Engine Type Single Cylinder, 4-Stroke OHV Ajr Cooled Displacement 208ee Low Oil Shutdown Yes Ignition System Break less Ignition Type, Flywheel! Magneto Starting System Recoil Fuel Unleaded Automotive Ga saline Capacity Fuel Tank 58 Gallon Lubricating Oil Capacity 203 Carbur
EBB ENGINE OIL ETT DO NOT attempt to crank or start the engine before it has been properly filled with the recommended type and amount of oil. Damage to the generator as s result of failure to follow these instructions will void your warranty. MOTE The commended oil type is 10W-30 automotive oil. However outdoor temperatures will determine the space proper oil viscosity for the engine. Use the chart to select the best for the door's temperature range expected.
Fuel must meet these requirements: & Clean, fresh, unleaded gasoline. B® Use regular UNLEADED gasoline with the narrator angina with a minimum 87 octane 787 AKI (31 RON). For high altitude uss, see "Operation at High Altitude”. Do not use gasoline with more than 10% alcohol such as £85 or ethanol. HATE: Avoid generator damage. Failure to follow Operator's Manual for fuel recommendations colds warranty. & DO NOT use unapproved gasoline such as E85. ® DC NOT mix oll in gasoline.
increased exhaust emissions can also result duets A ground terminal connected to the frame of the increased enrichment of the air fuel ratio. the generator has been provided on the control panel. For remote grounding, connect of a length of heavy gauge (12 AWG minimum) copper wire between the generator ground terminal snd » copper rod driven into the ground, We strongly recommend that you attitude carburetor main jet.
EEL TTI Make sure you review sate waning in order to prevent fire hazard. HB Keep area clear of inflammable or other hazardous materials. 8 Select a site that is dry, well ventilated and protected from the weather, # Keep exhaust pipe clear of foreign objects. B Keep generator away from open flame. B Keep generator on a stable and level surface. ELI nl Tilting can cause fusee spillage.
1. Before starting the generator, check for loose ar missing parts and for any damage which may have occurred during shipment. 2. Check oil level and fuel, 3. Disconnect all electrical loads from the generator. Never start or stop the generator with electrical devices plugged in or turned an. 4. Turn the fu &, Move the ¢ 7. Pull the starter cord slowly until resistance is felt and then pull rapidly. 8. Do not aver-choke. As soon as engine starts and warms up, move the choke lever to the "RUN" position. 3.
Sensitizing Electrical leans This unit has been pretested and adjusted to handier its full capacity. Before starting the generator, disconnect all load. Apply load only after generator is running. Voltage Is regulated via the engine speed adjusted af the factory for correct output. Readjusting will vied warranty. ERT When applying a lad, do not exceed the mad mum wattage mating of the generator when using one of more receptacles, Also, do not exceed the amperage rating of any one receptacle.
If a cover is used, do not install until unit has cooled. 4 PET AD Fuel and its vapors are extremely flammable and explosive which could cause burns, fire or explosion resulting in death, serious injury and/or property damage. DO NOT stop engine by moving choke control to “START” position. Important: Always ensure that the Fuel Valve and the Engine Switch are in the "OFF" position when the engine is not in use.
INTRAUTERINE BUD STORAGE BARGEMAN SORER DIE ITEM NOTES bdo iin Eos 5g) ploy operation) | 25 hours | 50 ROILS | tr angora |250 hos Check condition. Adjust gap ‘ Spark Plug) Cf clean. Replace If necessary. Check oil level. + Engine Off Replace. ¥ v Air Filter |Clean, replace if necessary, v Fue Sif Clean fus! filter and fuel tank uRi FIRE | sine, Replace if necessary. J Fue Line | Check dust hose for cracks of either damage. Replace if necessary. Check for leakage.
ENGINE MAINTENANCE Te prevent accidental starting, remove snd ground spark plug wire before performing any service, Change engine off every 100 hours. {for a new engine, change oil after 25 hours.) If you are using your generator under extremely dirty or dusty conditions, or in extremely hot weather, change the oil more often, Ent] Avoid prolonged or repeated skin contact with used motor ofl. ® Used motor oil has been shown to cause skin cancer in certain laboratory animals.
Spark Plug Haplessness Changing the spark plug will hap your engine to start easier and run better. {a} Remove the spark plug cap. {b) Remove spark plug using provided wrench. A Spark plug B Spark plug cap {z} Inspect spark plug for damage and clean with 3 wire brush before reinstalling {d) Adjust the electrode gap 0.028" 16 0.0317). {e) Seat spark plug in position and thread by hand to prevent cross threading. {f} Tighten plug with provided wrench and put the cap back on spark plug.
B® DO NOT touch hot parts and AVOID hot exhaust gases. ® Allow equipment to cool before touching. @ Keep at least 5 feet {1.5 m} of tolerances on all sides of generator including overhead. ® Replacement parts must be the same and installed in the same position as the original parts. Clean or replace spark arrested as follows: Depending on the type fuel used the type and amount of lubricant used, and/or your operating conditions, the exhaust part and muffler may become blocked with carbon deposits.
soup Term Storage Ris important to prevent gum deposits from forming irs essential fuel system parts such as the carburetor, fue hoses or tank during storage. Also, experience abdicates that alcohol-blanded fuels {rallied gasohol, Ethan or methanol can activate moisture, which leads to separation and formation of acids during storage, Acidic gas can damage the fuel system of an engine while in storage.
Probity Cause Connection 1. Circuit breaker is open. 1. Reset circuit breaker. 2. Fault in generator. 2. Contact authorized service facility. Engine is running, but no, 3, poor connection or defective cord | 3. Check and repair. AC output Is available, set. 4, Connected devious I bad. 4, Connect another device that Is In good condition. 1. Short circuit in @ connected load, | L Disconnect shorted electrical load. gle reins good st load but “bogs down” han loads are connected. 2. Engine speed Is too slow. 3.
PE300% Parts List NC. Part Huber Description [Cy NO. Part Numerable Desertion dy 1 {336713500 FIREMAN 208cc Engine 3367138560 | Hose fuse 1 2 {336713801 [Rubber Cap 336713861 fussily Naive 1 3 | 336713502 | Rubber Capt 1 54 | 336713582 | Guard mut.
PERT Parts int NGUYEN Part Number Depiction Quy] [NO] Past Lumbar Desalination iy. 1 | 338723600 (Crankcase Sub assembly. 336723863 | Carburetor 1 2 | $38728501 [Locating Pins 2 85 | 336723564 | Gasket, Air Cleaner 1 3 | 336723502 Sensor, Engine 336723556 | Nut 336723503 Fig. Bolt MBx12 8 57 | 338723556 | Spark Plug 1 4 | 336723504 (Camshaft Says.
Overestimation CONTACT THE INFIRMARY PRODUCT SERVICE DEPARTMENT AT 1-844-347-6261 rota www. firmanpowesrequipment.com te obtain warranty service information or to order replacement parts or accessories. HOU TO ORDER REPLACEMENT PARTS Even quality built equipment such as the electric generator you have purchased might need occasional replacement parts to maintain it in good condition over the years. To order replacement parts, please give the following information: 1. Model No. Rev. Level and Serbia! No.
Installation, Use and Maintenance This warranty will not apply to parts and/or labor if your product is deemed to have been misused, neglected, involved in an accident, abused, leaded beyond the generators limits, modified, installed improperly or connected incorrectly to any electrical component. Normal maintenance is not covered by this warranty. Other Exclusions This warranty excludes: cosmetic defects such as paint, decals, etc.
FIREMAN POWER EQUIPMENT INC.
18) Throughout the emissions warranty period defined in Subsection BINMAN wilt maintain a supply of warranted sans sufficient to meet the expected demand for such parts, 12) Any replacement part may be used In the performance of sy warranty maintenance or repairs and mist be provided without charge to the owner. Such use will not reduce the warranty obligations of the manufacturer. 110) Add-on of modified parts they ave not exempted by the Air Resources Board may nat se Used.