User's Manual

FB155BC User Guide Version 2.1
11 How to complete PC Configuration?
Page 20 / 2
11 How to complete PC Configuration?
The following PC Configuration shall be explained on the assumption that FB155BC is connected with PC
Interface Board(Jig board). If it is connected to MICOM, then you can change the set value by using AT
command language with reference to Attachment AT command language.
Components for PC Configuration
- FB155BC module
- PC Interface Kit
The PC Configuration could be processed with two significant ways.
First one is to use Config tool provided by FIRMTECH Co., Ltd.
Second one is to use serial communication program (Hyper Terminal, minicom) providing OS.
The respective way of setting is as follows.
11.1 PC Configuration using BTConfig tool
(1) Connect FB155BC to PC Interface Board, then connect to COM port(Serial port) of PC.
(2) Switch on the PC interface board in pressing the FASET button (The 4th switch in <Fig. 6-1>)
<Figure 11-1 BTConfig tool initialization>
(3) Execute BTConfig tool after connect FB155BC to serial port of PC.
(4) Click “SERIAL OPEN” button. (<Figure 11-1> blue borders)