Brochure

• Fusible valves approved for kerosene and No. 2 fuel oil

• High quality brass design with standard handwheel closure at 165˚F ambient temperature

• All washers and o-rings are made of Viton

equivalent material

• Valves are listed by Underwriters Laboratories for U.S. and Canada, conform to UL 842 standard

as a Manual Valve

• Multiple Fire Safety Valves are required by NFPA 31 code and CSA B139-15 on all installations

Fusible Inline Valves

Part No. Description

12109 ¼” FPT x ¼” FPT

12110 ⅜” FPT X ⅜” FPT

12111 ⅜” FPT inlet X ¼” MPT outlet

12130 ½” FPT X ½” FPT

12140 ⅜” ODF X ⅜” ODF with are nuts

12150 ½” ODF X ½” ODF with are nuts

Fusible Burner (Angle) Valves

Part No. Description

12210 ⅜” ODF inlet X ¼” MPT outlet (¾” long)

12230 ⅜” ODF inlet X ¼” MPT outlet (1¼” long)

12250 ½” ODF inlet X ¼” MPT outlet (1¼” long)

12270 ⅜” ODF inlet X ¼” MPT outlet (2” long)

12280 ½” ODF inlet X ¼” MPT outlet (2” long)

Fusible Tank Valves

Part No. Description

12320 ⅜” MPT inlet X ⅜” MPT Nipple outlet

12340 ½” MPT inlet X ⅜” MPT Nipple outlet 90°

12350 ½” MPT inlet X ⅜” MPT Nipple outlet 90° side

Replacement Handwheels

Part No. Description

12510 Fusible 165°F each

12510U Fusible 165°F (25) per bag

12511 Fusible 200°F

12512 Fusible 165°F 1” Valve

12513 Fusible 200°F 1” Valve

MPT = Male Pipe Thread, FPT = Female Pipe Thread, ODF = OD Flare

Fire Safety Valves

Part No. 12110

Part No. 12340

Part No. 12230

Part No. 12140

Part No. 12350

Part No. 12511Part No. 12510

Part No. 12210

Product Sheet

MH 46634

PAGE 1
Fire Safety Valves Product Sheet • Fusible valves approved for kerosene and No. 2 fuel oil • High quality brass design with standard handwheel closure at 165˚F ambient temperature • All washers and o-rings are made of Viton® equivalent material • Valves are listed by Underwriters Laboratories for U.S. and Canada, conform to UL 842 standard as a Manual Valve • Multiple Fire Safety Valves are required by NFPA 31 code and CSA B139-15 on all installations MH 46634 Fusible Inline Valves Part No.
PAGE 2
Inline, Check & Lever Valves, Thermal Switches Product Sheet Non-UL Listed Fusible Inline Valves Part No. Description 12112 ¾” FPT X ¾” FPT 12113 1” FPT X 1” FPT Part No. 12113 Inline Check Valves Part No. Description 12409 ¼” FPT X ¼” FPT 12410 ⅜” FPT X ⅜” FPT 12420 ⅜” ODF X ⅜” ODF with flare nuts 12430 ½” FPT X ½” FPT 12440 ½” ODF X ½” ODF with flare nuts Part No. 12410 Part No. 12420 Part No. 12527 Part No. 12501 Thermal Switches Part No.