Product Manual

General information / safety instructions
14 firstAir screw compressor FAS03 – 37
- Have faulty components repaired immediately.
Air receiver
WARNING!
Danger to life in the event of improperly performed
work on the air receiver!
Improper handling of air receivers can cause a sudden
release of pressure and thereby cause serious or even
fatal injuries and considerable material damage.
- Never carry out welding or soldering work on the air
receiver tank.
- Do not carry out any mechanical work on the air
receiver tank.
- Fully vent the air receiver tank via the fitted vent
screw after connecting the pneumatic line.
- Do not start work on compressors with a air
receiver before the pressure has been completely
relieved and checking that there is no pressure.
- Do not start any work on the air receiver until the
gas pre-load pressure has been completely
relieved.
Compressed air
WARNING!
Danger of injury due to compressed air!
Compressed air can escape from compressed air
hoses or components under pressure in the event of
improper handling or in the event of a fault. This can
result in eye injuries, dust being raised, or hoses
making uncontrolled movements.
Pressurised components can move in uncontrolled
manner and can cause injuries if handled incorrectly.
- Before removing pressurised hoses or components,
depressurise them.
- Have any faulty pressurised components replaced
immediately by specialist personnel.
- Before all work, ensure that the compressor is
depressurised; wait at least 5 minutes.