Product Manual

Installation
6.2 Requirements for the installation location
Set up the screw compressor so that the following conditions are
complied with:
• The installation location is level.
• The stability of the machine is guaranteed.
• The machine is easily accessible and can be accessed from
all sides.
• There is sufficient lighting.
• There is sufficient ventilation.
• A power supply is available.
• Escape routes and rescue equipment are freely accessible.
• The machine is not exposed to an explosive atmosphere.
• The machine is not exposed to a corrosive atmosphere.
• The machine is not exposed to direct sunlight.
• There is no external heat from surrounding sources of heat.
• No dust can accumulate.
• Fire protection measures have been taken.
• The machine is not exposed to vibrations.
• The surface is resistant to solvents, impermeable to liquids,
is anti-static and easy to clean.
• There are no machines in the vicinity which cause electrical
or electromagnetic interference.
6.3 Installation
If the screw compressor is installed in a location which does not comply with the requirements and without
specific planning, and operation starts as soon as the lines have been connected, this will, in most cases,
be the cause of problems with maintenance as well as a poor quality of the compressed air generated by
the screw compressor.
NOTE!
Choosing a suitable installation site is a requirement for proper
use of the screw compressor system.