Product Manual

Maintenance
Hot surfaces
WARNING!
Danger of injury due to hot surfaces!
The surfaces of components, and operating materials
(e.g. Oil or cooling water) may heat up considerably
during operation. Contact between the skin and hot
surfaces and liquids cause serious burns to the skin.
- When performing any work near hot surfaces, heat-
resistant occupational safety clothing and protective
gloves must be worn.
- When performing any work with operating materials,
heat-resistant occupational safety clothing and
protective gloves must be worn.
- Before any work, make sure that all surfaces have
cooled to ambient temperature; wait at least
30 minutes.
Improperly performed
maintenance work
WARNING!
Danger of injury due to improperly performed
maintenance work!
Improper maintenance can cause serious injuries and
considerable property damage.
- Before starting work, ensure sufficient installation
space.
- Make sure that installation area is organised and
clean! Loosely stacked components, or components
and tools left lying around, are a source of accidents.
– If components were removed, ensure correct
installation, reinstall all fastening elements and
observe screw torques.
- Prior to re-commissioning, observe the following:
- Ensure that all maintenance work has been
performed and completed according to the
information and instructions included in these
instructions.
- Ensure that there is nobody in the danger area.
- Ensure that all covers and safety equipment are
installed and function properly.