Product Manual

Maintenance
Environmental protection
Adhere to the following instructions on environmental protection when
performing maintenance work:
 Remove any escaped, used or excess grease from all lubrication
points which are supplied with lubricant by hand and dispose of it
in accordance with the applicable local regulations.
 Collect replaced Oils in suitable containers and dispose of them in
accordance with the applicable local regulations.
The following sections describe maintenance work that is required for optimal and fault-free opera-
tion of the machine.
If increased wear is identified during regular checks, the required maintenance intervals must be
shortened to correspond to the actual signs of wear. For questions about maintenance work or in-
tervals, contact the manufacturer; see the contact data on page 2.
13.2 Oil and filter replacement
No.
Designation
Maintenance cycle
1
Air filter
Every 2 000h
2
Oil filter
Every 2 000h
3
Oil separator
Every 4 000h (FAS03, 4, 6 every 2000h)
4
Oil
Replace break in fluid after 500h, every 4 000h thereafter