Product Manual

Troubleshooting
78 firstAir screw compressor FAS03 – 37
14.1 Commissioning after rectifying a fault
After rectifying the fault, carry out the following steps for recommis-
sioning:
1. Check all screw connections which were unfastened before-
hand to make sure they are tightened.
2. Ensure that all tools, materials and other items of equipment
that were used have been removed from the work area.
3. Check whether all protective devices and covers removed be-
forehand have been reinstalled properly.
4. Reset emergency stop equipment.
5. Acknowledge fault
6. Carefully open the compressed air network-side shut-off
valve.
7. Make sure that there is nobody in the danger area.
8. Start the screw compressor