Full Product Manual

Set-Up & Installation

DANGER: ELECTRICAL SHOCK HAZARD. Turn o power to the area where

you will install this unit at the circuit breaker or fuse box before beginning installation. Failure

to turn o the power before installation may result in serious electrical shock, injury or death.

Tools You Will Need:

• Needle-nose pliers or utility knife

• Standard phillips screwdriver

• Wire strippers

Ensure the Android software is updated to 5 or later and iOS software is updated

to iOS 10.0 or later, then download the Onelink Home App.

If any unit in the series does not alarm with the test button, TURN OFF POWER and recheck connections.

If it does not alarm with the test button when you restore power, replace it immediately.

Improper wiring of the power connector or the wiring leading to the power connector

will cause damage to the alarm and may lead to a non-functioning alarm.

Step 1

Download the free Onelink Home App from the App Store or Google Play

and follow set-up instructions.

Step 2

Attach the mounting bracket to the junction box.

Step 3

Using wire nuts, connect the power connector to the household wiring.