Operation & Installation Guide 7319DFB / 7334DFB Manual # M08-0457-006 www.FirstAlert.
Operation & Installation Guide Index Package Contents Overview of Your Safe - Package Contents.....................................................................1-2 Diagrams...................................................................................................................................... 3-4 Removing the Safety Interlock Screw - Battery Installation.................................... 5-6 MA NUA L Opening Safe for the First Time.....................................................
DiagraM EXTERIOR Diagram Exterior (Model 7334DFB) (Model 7319DFB) Serial Number (Back, top left corner) Serial Number (Back, top left corner) Safe Body Electronic Lock Handle Single Lever, 3 Spoke Handle Single Lever, 3 Spoke Safe Door Safe Door External Hinges External Hinges Size of safe, graphics and color may vary on some models Size of safe, graphics and color may vary on some models Diagram interior (Model 7319DFB) Heat Expandable Door Seal Electronic Lock Safe Body Diagram interio
reMOVING THE SAFETY INTERLOCK SCREW battery installation IMPORTANT: Your safe may have a “Door Lock Override Device” installed. This device is to prohibit the lock from locking and it must be removed before the safe can be used properly. 1 Locate the handle spoke in the plastic bag and remove the protective cover. important Keypad cannot be removed from door. 1 Locate the 9V Alkaline Battery in the plastic bag.
Opening Safe for the First Time INSTALLING THE HANDLE SPOKES Follow REMOVING THE SAFETY INTERLOCK SCREW and BATTERY INSTALLATION on pages 5-6 before proceeding. Follow OPENING SAFE FOR THE FIRST TIME on page 7 before proceeding. 1 Turn handle counter-clockwise until it stops. 2 Enter the six (6) digit factory preset passcode 1-2-3-4-5-6. (The lock will beep two (2) times). 3 Within four (4) seconds, turn the handle clockwise. 4 Pull door open.
programming the lock Open the Safe Door 1. Enter your existing six (6) digit passcode and open the door. SHELF INSTALLATION NOTE: Determine desired height and layout of shelves before you begin installation. 1. Locate Metal Shelf Clips inside the safe. NOTE: If you are changing the passcode for the first time, your existing passcode will be 1-2-3-4-5-6. 2. Insert the top of the clip into the notch. 3. Push the bottom of the clip into the lower notch. 2.
BOLTING YOUR SAFE TO THE FLOOR 1 Locate the four (4) Concrete Bolts inside the safe. 2 Remove interior shelving and four (4) Bolt Down Hole Caps. 3 Trouble shooting guide problem solution I lost the combination to my safe. What do I do? For your protection, the most important aspect of this process is for us to verify the true ownership of the safe. Please go to www.firstalert.com and click on the COMBINATION / KEY REQUEST page and follow the instructions.
Use, Care and Maintenance Consumer Affairs When properly maintained, your safe will continue to operate and accurately read the authorized passcode for many years. In order to ensure optimum performance of your safe, please follow these simple precautions: Your Safe’s Unique Identification Numbers When contacting Consumer Affairs, you should be prepared to supply some important information that specifically identifies your safe.
Safe Identification Record Model Number LIMITED WARRANTY ! Serial Number Passcode BRK Brands, Inc., (“BRK”) warrants that for a period of five (5) years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement or repair will be made with a new or remanufactured product or component.