Installation Guide

8 3
Home and Office Security Safes
Test Locking System
Important: ENGAGING LIVE BOLTS
Closing the safe door with the Live Bolts in the locked (extended) position can
damage the safe. The Locking Push Button should only be used when testing or
programming the safe with the door remaining open.
Electronic Locking System Test
With the door still open, you can test the Electronic Digital Lock
by manually activating the Locking System.
To activate the Locking System, locate the Locking Push Button
on the inside of the safe door, push it in and turn the handle
downward to the left. This will cause the Live Bolts to extend out
and into the locked position. Now with the door open and the
Live Bolts in the locked position, you may proceed to Testing the
Passcode.
LOCKING PUSH
BUTTON
EXTENDED
LIVE BOLTS
Use, Care and Maintenance
Safe Care and Maintenance
When properly maintained, your safe will continue to operate and accurately
read the authorized Passcode for many years. In order to ensure optimum
performance of your safe, please follow these simple precautions:
Replace Batteries – For best results and performance, we recommend that the
batteries be replaced at least once a year or sooner depending on amount of
use. Clean the battery contacts in the battery compartment and on the batteries
before installing new batteries.
Clean Hands - Never attempt to operate the digital keypad if your hands have
excessive dirt, debris or liquids on them.
Clean Safe – To clean the surface of your safe, it is recommended that you use a
mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface.
Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.
For future reference, store this Operation and Installation Guide in a secure area
away from the safe. DO NOT DISCARD!
Appropriate Use of Your Safe
This First Alert® Waterproof, Fire Resistant with Ready-Seal Safe™
protects important documents and many other valuables.
Verified fire protection for: Memory sticks, CD’s & DVD’s, USB Drives.
This product is NOT INTENDED to protect audio or video cassettes, floppy discs, data
cartridges, film and photos or photo negatives
Testing shows that the interior temperature of the safe remains below 350°F (177°C)
for 1 hour during a fire up to 1700°F (927°C) when used properly. Your safe must be
closed and latched in order to properly protect the contents from fire.
Moisture Warning
We recommend that you place delicate items such as pictures or intricate jewelry
into an air-tight container before storing them in your safe. Avoid placing your
safe in areas of high humidity. For optimum performance, the safe should be
opened and aired out for at least 20 minutes every two weeks.
Firearms Warning
This safe is not designed to store medication, items with combustible content,
guns or other weapons. Please contact BRK at 800-323-9005 or shop
www.FirstAlert.com for information about safes that can securely store your
firearms or medication.
Pearls
Because pearls sustain heat damage at temperatures below 350° F, we advise that
you DO NOT store pearls in this fire safe.