User's Manual

Page 33
REMOTE ACCESS
V SHOW
In the Web interface, select the focus window in the live
window. The focus window has a light blue
border. From the left channel column, select the channel, as
shown in below:
Channel Choices
Click on arrow in upper right corner, this allows you to choose
to open or close the channel to the main stream or secondary
stream.
The Channel display will show the current DVR’s IP address,
local timer and transfer rate in the upper right corner.
The lower left corner shows the current video feed’s channel
name.
Click one of the icons, shown above, to switch between single
screen and multi-screen views.
The function icons are located in the lower right corner of the
display window. The six icons represent :
1. Area Zoom: Enlarge Video image
2. Multi-Screen switch: Switch from a single screen to multi-
screen views and vice versa.
3. Local Record: Saves and records video to a local hard
disk while in live view. Set up the recording path in the
Configuration menu.
4. Capture: Captures the present video channel. Set up the
path in “Other”.
5. Sound: Turns audio on or off.
6. Video Off: Turns off the focus window.
PTZ Control
To set the P/T/Z protocol, see page 15.
Use these commands to control PTZ cameras. Step sizes are from 1 to 8, in
increments of 1 step.
1. Set Enter and adjust the limits and presets for each channel
2. Preset Modify a preset position by using the directional buttons and inputting
a preset number, then click “Add” to save.
3. Auto Tour Select “Tour”. Point between the first cruise line and cruise input
box value. Input numbers in “Path” and “Preset”. Click “Add Preset” to add
a preset value to the cruise path, and repeat to add additional presets. Click
“Clear Preset” to delete a preset. Repeat this step to delete more presets.
4. Pattern Click “Pattern” in order to record an automated pattern. Then go
back to the P/T/Z controls to modify the zoom, focus and iris, etc. Stop
recording in the “Pattern” setting to save the pattern.
5. AUX Open Turn auxiliary components on and off.
6. Light Wiper Turn the Light Wiper protocol on and off.
Live View
3 54 61 2
3
5
4
6
2
1