User's Manual

Page 37
REMOTE ACCESS
IMS200
Main Interface
Log In
After launching the IMS200 software, the log-in screen will open.
The default Password and Username are “super” After logging on,
the password can be modified by entering the settings menu.
Using the IMS200 software
After you are logged in, the main DVR interface will launch (see image to the
right)
Certain settings can be adjusted by selecting menus to the right of the camera
display area. The menus are:
1. Camera List
2. PTZ Control
3. Monitor Project
4. Setting
5. User-defined Tool
6. Device Running
7. Alarm
8. Query
9. EMap
10. Dev State
11. TV Wall
See page 56 for additional
information on the menus. Settings
can also be adjusted by using the
right-click mouse button.
Navigation Controls
Depending on the current menu
in use, the navigation controls
on the top right of the program
will allow minimizing the screen,
maximizing the screen to full
screen, returning to the main
screen, or exiting the software
1. Minimize Click to minimize
window
2. Fit/Window Click to either
enlarge the window to full
display size or return to
window view
3. Exit Click to exit the current
screen and return to the main
display
4. Log Off Log off the DVR and
close the IMS200 program
3
4
1 2