User's Manual

Page 43
4. Right click on the alarm icons, to enable or stop the tasks.
5. Set a task first and tick the items. This is the most
convenient way to set the task.
Plan the time periods for different tasks.
After you set the task, global config and relate config, the
alarm icons on screens will be in red as alarm occur. The alarm
relates are:
4. Sound: enable the function and select a audio file (format:
.wav)
5. TV wall: enable the function, the alarm video will be send to
TV wall as the alarm occur.
6. Alarm interface: enable the function, the alarm interface will
open as the alarm occur.
Relate the alarm video, support maximum 4 channels.
On the popup screen, you can find a voice talk icon to apply
this function.
Note:
1. the on playing relate video corresponding with the flag alarm
record.
2. double left click the alarm record to check the relate video
when there are more than one alarms occur.
3. turn to the next or previous video by down and up icon.
4. click “Confirm” to end the video relate.
5. double left click to full screen this window.
The alarm icon will show on the screen as the alarm occurs.
If you set the alarm in EMap, alarm indicators will open to
indicate the location.
SMS output and talk output are selectable. Alarm notifications
will be sent to your phone by SMS or be output by a sound
device. You have to install DMSS and alarm output software for
alarm SMS output.
Alarm Task Config
Click “Alarm”→ “Task Config” to launch the interface
Click “New” to name a task; then select devices for alarm task
by button; at last save the configuration as a new task.
Click to edit and enable the alarm type.
Click “Delete” to delete a task. Introduction: the running tasks
are still valid after you restart the system.
Alarm Plan Configuartion
Set plans to apply the tasks in particular time periods.
Click “Alarm” → “Plan Config” to launch the interface.
Plans will be automatically canceled when all the tasks are
canceled.
Relate Configuration
Click “Alarm” → “Relate Config” to launch the interface
Select the device in list and add it to the relate.
Tick the alarm type which include sound relate, TV wall relate,
EMap relate and alarm interface relate.
Click the camera “Config” to open the window.
Click the “Output” to configurate the SMS output and talk
output.
Global Configuration
Click “Alarm”→ “Global Config” to open the following interface
which include motion detect, cover, video loss, external alarm,
host alarm and disconnection alarm.
1. Audio: enable or disable the function. You can select sound
and set duration.The audio format is WAV.
2. Video: enable or disable the video relate. Set popup video
duration.
3. Assist (e.g. light): enable or disable the assist devices and
set the devices start time
4. Alarm interface: enable the popup alarm interface
5. Output: enable or disable the alarm output Introduction:
global config aim to the whole system. You have to enable
the alarm relate and then set the SMS and talk output.
REMOTE ACCESS
IMS200