User's Manual

Page 48
PTZ Control
Open the PTZ interface of authority camera to set step, zoom, focus, iris, preset,
auto tour, aux and etc. Click “PTZ Ctrl” to open the toolbar.
1. Direction key 8 direction: Control a connected PTZ camera movements
2. Sit: Single click on screen and position this point to the centre. Support 1-36
zoom in/out function. Enlarge the selected screen by dragging bottom-up. (only
controlled by mouse)
3. Simulate joystick: Enable the function,control the step and camera movement
by simulating a joystick with a mouse. Scroll wheel controls the camera zoom.
4. Step: There are 1-8 steps controlled
5. Zoom: Control the camera zoom
6. Focus: Modify the focus
7. Iris: Modify brightness
8. Preset: When Pan/Tilt moves to the target position, input the preset number and
save it.
9. Auto tour: Auto tour lines
10. Aux: Light on,light off
PTZ Presets
Click “PTZ” → “PRESET” → “Setup” in menu to open the preset window. Input a
preset number, name and save this preset.
Note: preset number is 1-128, the name could be in number, letter or symbol, the
minimum length is 16 characters.
Select a preset and click “Delete” to cancel it.
Return to PTZ control, select preset from list, then click “Go To” to control the
camera motion.
Auto Tour
Click “PTZ” → “CRUISE” → “Setup” to open the auto tour window (see below)
Click “New” to add tour.
Tour name, can be modified.
REMOTE ACCESS
IMS200