User's Manual

Page 57
REMOTE ACCESS
CAMERA SETTINGS
Channel: Select channel of the PTZ device
Ch name: Give the channel number a name
Main: resolution quality of camera -
CIF or D1 on 4/8 channel
Standard/Net Mode on 16 channel
Minor: Lower quality stream of camera-
Select QCIF, CIF or None.
PAL/NTSC: Default is NTSC
Audio: Turns audio on or off (only works
if a microphone is installed)
Position: Changes the position of the date
and time and channel number.
Select Left down,
Left up, or None.
Main size: Chose the size of
the file for streaming. Size is
by MB/H(megabytes per hour)
Minor size: Chose the
lowest number of MB/H
Minor FPS: Choose
the frames per seconded – higher the better
PTZ Address: Address of the PTZ camera
Protocol: Choose the protocol of the PTZ
NOTE: ONLY compatible with pelco-D
Band Rate: chose the band rate of the PTZ
Record task: sets your scheduling recording
Device Logs ScreenPTZ Options Screen
Camera Settings