User's Manual

Page 59
REMOTE ACCESS
V SHOW
Name Configuration
Password XXXXXX
DYNDNS DDNS (WWW.DYNDNS.COM)
Register
To login at Dyndns, register an account.
Click on the confirmation link, to log in to the account, click
“Add Host Services” in “My Services” , set your own real name
and then follow the directions.
Configuring the DVR
OpenMain Menu→Configuration→Network→Advanced→DDNS
→Enable
Name Configuration
DDNS Dyndns DDNS
IP Members.dyndns.org
Port 80
Domain Name XXX.3322.org
Username XXX
Password XXXXXX
LTS DDNS (HTTP://NS1.DVRLISTS.COM/)
Register
To login at LTS DDNS, register an account.
Click on the confirmation link, to log in to the account, click
“Add Host Services” in “My Services” , set your own real name
and then follow the directions.
Configuring the DVR
Open Main Menu→Configuration→Network→Advanced→DDN
S→Enable
Name Configuration
DDNS LTS DDNS
IP Members.dvrlist.com
Port 80
Domain Name XXX.dvrlist.com
Username XXX
Password XXXXXX
Test and Verify DDNS
After configuring the Embedded DVR, wait for
a few minutes to allow the analysis records to
update.
Click on Operation in the menu, input “cmd”
and click “OK” to open a command line
window, as shown in below, Run Command
Line Program.
Input “ping+ Domain name” then press Enter,
as shown in The computer will analyze the
domain name configured in the DVR, and
return to the current IP address, as the graphic
shows underlined in red. When the IP address
corresponds to the embedded DVR’s IP
address in Public internet, it means the DDNS
is set up correctly. If they are not the same,
please check the network connection of the
embedded DVR and the DDNS information.