Installation Guide

SMOKE
ALARM
CAT.
7010B
PHOTOELECTRIC
Photoelectric technology is generally
more sensitive at detecting large par-
ticles, which tend to be produced in
greater amounts by smoldering fires.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
OPTIPATH 360
TECHNOLOGY
TM
Provides 360 degrees of direct access
to the smoke sensing chamber.
SILENCE FEATURE
Silences nuisance alarms.
TWO LOCKING
FEATURES
Pins are provided to lock battery draw-
er and/or alarm to base. Perfect for
apartment, dormitory or hotel applica-
tions.
Description:
The BRK Brands, Inc. model number 7010B is a wire-in, 120V AC 60Hz single and/
or multiple station photoelectric smoke alarm specifically designed for residential
and institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family dwellings as defined in standard NFPA 101.
Model 7010B complies with UL217, CSFM, NFPA 72, HUD, FHA and other agencies
that model their codes after the above agencies. It meets building codes where
AC/DC with silence photoelectric smoke alarms are required. The alarms are inter-
connectable with up to 18 devices, of which 12 can be smoke alarms.
The BRK 7010B features a photoelectric smoke sensing chamber, an 85dB horn, a
9V battery back-up and a “silence” feature. Optipath 360 technology provides 360
degrees of direct access to the smoke sensing chamber. Alarm Latch: Easily identi-
fies initiating alarm even after alarm condition has subsided. The “Perfect Mount”
system features a gasketless base and a mounting bracket that keeps the alarm
secure over a wide rotation range to allow for true alignment. This will allow fine-
tuning on the positioning to compensate for out of aligned wall studs and to keep
the wording level when wall mounting. Battery installation and removal can occur
while the unit is mounted to the ceiling or wall via the side load battery compart-
ment. Other Contractor Preferred features include a dust cover to keep alarm clean
during construction, keyhole slots in the mounting bracket eliminate the need to
remove the electrical box screws for installation. Two locking features are provided
to prevent battery theft and/or theft of the unit. Connection to AC power is made
with a “Quick-Connect” wiring harness. In-
stallation is quick, easy and cost
effective.
120V AC, 60Hz Wire-in
with 9V Battery Backup
Listed to
Standard
UL 217
PHOTOELECTRIC