MSDS

CHEMICAL NAME CAS No.:
% w/w of
Extinguisher
TOXICITY
DATA
N/A MIXTURE 90
N / T
Nuisance Dust
Nitrogen 7722-76-1 .6 NONE
FOR THE CYLINDER N/A
FOR DRY CHEMICAL AGENT
This product is a Fire Extinguisher and is not flammable.
Eye Contact:
Flush with water for a minimum of 15 minutes. If irritation persists seek medical attention.
Skin Contact:
Wash affected area with soap and water. If irritation persists seek medical attention.
Remove from exposure. If irritation persists seek medical attention.
Ingestion:
Aurora, IL 60504-8122
(630) 851-7300
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Safety Data Sheet
FIRST ALERT® Pressurized Cylinders
used with Fire Extinguishers Classificated BC Sodium Bicarbonate
Manufacturer's Name:
NONE
SECTION 3 - COMPOSITION / INFORMATION ON COMPONENTS WITH IN FIRE EXTINGUISHER
January 11,2010Revision Date:
OSHA PEL mg/m
3
10
SECTION 4 - FIRST AID MEASURES;
Inhalation:
FOR A COMPLETE MSDS FOR THE DRY CHEMICAL EXTINGUISHING AGENT CONTAINED WITHIN
THE FIRE EXTINGUISHER SEE ACCOMPANYING MSDS SHEET , CONTACT FIRST ALERT® AT 1 800
323 9005 OR CONTACT THE DRY CHEMICAL MANUFACTURE LISTED ON THE LABEL.
If patient is conscious give large amounts of water and induce vomiting. Seek medical
attention.
NONE
15
N/A -Contents are a mixture / preparation
N/A -Contents are a mixture / preparation
BRK Brands, Inc. (First Alert)
Trade Name/Label Name:
CAS Number:
Chemical Name
BC Fire extinguisher (Dry Chemical)
3901 Liberty Street Road, Aurora, IL 60504
Business Phone / Fax:
1-800-323-9005IN CASE OF EMERGENCY:
Address:
ACGIH TLV
mg/m
3
Chemical Formula: N/A -Contents are a mixture / preparation
EINECS Number: N/A -Contents are a mixture / preparation
Agent / BC Sodium Bicarbonate Mixture
3901 Liberty Street Road
SECTION 2 - HAZARDOUS IDENTIFICATION
SECTION 5 - FIRE FIGHTING MEASURES
630-851-7330 / 630-851-8205
A Fire Extinguisher is a pressurized cylinder containing compressed gas, Nitrogen, and a dry
chemical extinguishing agent. There are no hazardous when used and stored in accordance with
the instructions on the label and manual. A fire extinguisher could still have pressure in it even if
the indicator gauge is in the 0 psi range.
1 REV Jan 11, 2010

Summary of content (3 pages)