Installation Guide

D225215-83E
n
1 Plan
Draw your fence plan on the grid below.
The following charts will help you determine the correct heights for panels,
posts and the proper spacing for panels and gates.
Comparison of Heights
Fence Height
(Post Height Above Ground)
Panel
Height
Flanged Post
Height
Post w/o Flange
Minimum Length
3' (36") 32" 36" 54"
3-
1
2' (42") 38" 42" 60"
4' (48") 44" 48" 66"
5' (60") 58" 60" 78"
6' (72") 70" 72" 90"
Post Spacing for Gates
Actual Gate Width
Actual Opening Between Posts
Using Standard Gate Hardware Kit
Gate with Lockbox
Using Standard Gate Hardware Kit
33" 36" 35-
3
4"
39" 42" 41-
3
4"
Post Spacing for Panels
Panel Length
Post Spacing
(Center-to-Center)
Basic
Grade
Standard
Grade
Premium
Grade
Basic
Grade
Standard
Grade
Premium
Grade
94" 93" 92" 96-½" 95-½" 94-½"
NOTES _____________________________
_____________________________________
____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
Sample Fence Layout
HOUSE
PROPERTY LINE
PROPERTY LINE
PROPERTY LINE
GATE
P PPP
P
P= Post
P
P P
Description Quantity To Use
Qty.
To
Buy
Price
Each
Total
Price
Panel
Quantity varies
based on
application
Gate
Quantity varies
based on
application
Post
Post with Flange
One per panel,
plus one, plus one
additional for each
gate
Mounting Bracket
One pack of four
per panel
Gate Hardware Kit
1 kit per gate
Gate Cane Bolt
1 per gate
Masonry Anchor
One pack of four
per post, if needed
Gate Flat Wall Hardware Kit
1 kit per gate
Gravity Latch Kit
1 kit per gate
Plastic Post Tops
1 per post
For 100 ft of Fence, You’ll Need For 150 ft of Fence, You’ll Need For 200 ft of Fence, You’ll Need
Qty Description Qty Description Qty Description
13 Fence Panels 19 Fence Panels 25 Fence Panels
1 Gate * 1 Gate * 1 Gate *
15 Posts 21 Posts 27 Posts
13 Mounting Brackets 19 Mounting Brackets 25 Mounting Brackets
1 Gate Hardware Kit 1 Gate Hardware Kit 1 Gate Hardware Kit
20 Bags of Quick Set Concrete 28 Bags of Quick Set Concrete 36 Bags of Quick Set Concrete
n
2 Components Needed
n
3 Choose Panels, Gates & Accesories
NOTE: For surface mounting installation you will need to use masonry or anchor bolts with flanged posts.
* Quantities may vary based on application.
Before You Start Your Project, Remember:
Tape measure, post hole digger, hoe, shovel, wrench, pliers, carpenter’s
level, wheel barrow, gloves, rope, string, wood stakes, and chalk line.
Planning and installation guide
ORNAMENTAL STEEL FENCE

Summary of content (2 pages)