User's Manual

Ð17Ð

BYPASSING PROTECTION ZONES

Using the

BYPASS Key

This feature can only be used if a remote keypad has been

installed with the system. User code numbers 2-6 can only be

used to bypass emergency and 24 hour non-fire protected zones.

This key is used when you want to bypass one or more zones, thus leaving them

intentionally unprotected. For example, a protected stock room door can be

bypassed when it is necessary to open the door without causing an alarm. To

bypass an emergency zone, do the following.

1. Enter your user code and press the BYPASS key.

2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 02, 03, etc.).

Single digit zone numbers must be preceded by a zero.

3. When finished, the keypad will momentarily display a "Bypass" message for

each bypassed zone number. Wait for these zones to be displayed, to

confirm their bypass.

4. A bypass message is sent to the central station.

All emergency zone bypasses are removed when an OFF

sequence (user code plus OFF) is performed.

TYPICAL MOMENTARY DISPLAYS OF BYPASSED ZONE

BYPASS 03 FRONT

UPSTAIRS STORAGE

ALPHA

ALARM

AWAY

BYPASS

STAY

SUPV NO AC

PHONE TEST

NOT READY

CHIME BAT

FIRE CHECK INSTANT TAMPER

FIXED-WORD