User's Manual

Ð21Ð

ACTIVATING A FIRE DRILL TEST

Using the

+6+9 Keys

This feature can be

activated only while no

alarm, supervisory, or

trouble condition is

present.

This test requires that a keypad and external fire alarm sounder be installed

with the system.

Note: Only User Number 2's code can activate this test.

This test activates the external fire alarm sounders for the purpose of conducting

a fire alarm drill. Your system will remain operational for fire alarm signaling while

this test is active (

although no message will be sent to the central station unless

an actual alarm occurs).

¥ To activate the Fire Drill Test:

Enter User Number 2's code, then press the #

+ 6 + 9 keys.

The keypad LCD will display "FIRE DRILL ACTIVE (Alpha) or "TEST dF"

(Fixed-Word) and the external fire alarm sounders will produce either a steady

or a pulsing sound while this test is active, depending on what your installer

selected.

FIRE DRILL

ACTIVE

ALARM

AWAY

BYPASS

STAY

SUPV NO AC

PHONE TEST

NOT READY

CHIME BAT

FIRE

CHECK INSTANT TAMPER

ALPHA FIXED-WORD

¥ To terminate the Fire Drill Test:

Enter any User Code, followed by the OFF key.

Your system will also automatically terminate this test if an alarm, supervisory

or trouble condition is detected while it is activated.