user manual

– 20 –
86(5)81&7,216
AUX FUNCTION
General Information
The
AUX
key may have been programmed to either perform a predefined function or to
send a preset message to a pager (see PAGER FEATURE section for pager operation).
Ask your installer which function has been assigned for your system.
AUX
Key:
PRE-DEFINED FUNCTION PAGING FUNCTION
If programmed for the AUX function, you can use the
AUX
key to activate a string of up
to 20 keystrokes that have been stored in the system’s memory. Typical functions
include:
• Seldom used but repeatable sequences
• Arming sequences that involve bypassing zones before arming
• Device activation sequences
Defining the AUX Function
The system must be disarmed before defining a function.
1. Enter Master Code + # +
AUX
(hold down until 4 beeps sound).
2. Press the desired command sequence, up to 20 keystrokes. Press the
AUX
key
between each command in the sequence.
3. Press the
AUX
key twice to end the definition.
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the
following string:
Master Code + # +
AUX
(hold until 4 beeps sound), then
6 10 11 AUX AWAY 0 AUX AUX
Note that the
AUX
key is included in the 20 keystroke maximum.
Performing the AUX function
Press and hold down the
AUX
key at least 2 seconds until 4 beeps sound, then enter your
security code. The defined function will begin.