Use and Care Manual

Page 58
ALARM SETTINGS
Setting Sensor Alarms
Enter Alarm Settings of System Configuration interface:
Menu > Configuration > Alarm > Alarm Input.
Check Enable and click Settings.
1. Select Trigger Channel and select channels to start record/capture
or to monitor in full-screen when an external alarm is input.
2. Click Apply and then select Arming Schedule.
3. Choose day of the week and up to eight time periods.
4. Click Apply.
NOTE
:
Settings can be copied to other days by clicking Copy.
The Linkage Action tab can be used to set up alarm response actions
of the alarm input.
To set PTZ linkage of the alarm input, click on PTZ
Linking. Complete the settings and click OK.
NOTE
:
Check whether the PTZ or speed dome
supports PTZ linkage. One alarm input can
trigger presets, patrol or pattern of more than
one channel. But presets, patrols and patterns
are exclusive.
NOTE
:
Settings can be copied by clicking the Copy button
on the Alarm Input Setup interface.