Use and Care Manual

Page 89
DST Settings
Enter the General Settings interface: Menu > Configuration > General > DST Settings.
Smartbridge Function
The NVR must be connected to the Internet to enable the P2P feature. The P2P feature
can be enabled through the DDNS interface: Configuration > Network > DDNS.
1. Check the box to enable.
2. Define a six-letter, all-uppercase
custom verification code.
3. Click on Device Management to
install and open a PC.
ADDITIONAL INFORMATION
NOTE
:
You can check the checkbox before the Auto DST Adjustment Item, or you can manually check the Enable DST
checkbox, and then choose the date of the DST period.