Use and Care Manual
Page 13
PRODUCT OVERVIEW
Remote Control
The remote control provided requires two (2) AAA batteries. Install batteries
before operating.
item Function DeScription
1 Power Power on or off
2 DEV Enable/disable remote control
3 Alphanumeric Buttons Same as alphanumeric buttons on front panel
4 EDIT Sames as EDIT button on front panel
5 A Same as A button on front panel
6 REC Same as REC button on front panel
7
PLAY
Same as PLAY button on front panel
8
INFO
Reserved for future use
9
VOIP/MON
Same as MAIN/SPOT/ZOOM on front panel
10
MENU
Same as MENU button on front panel
11
PREV
Same as PREV button on front panel
12
Direction/Enter
Same as direction buttons on front panel
13
PTZ
Same as PTZ button on front panel
14
ESC
Same as ESC button on front panel
15
Reserved
Reserved for future use
16
F1
Same as F1 button on front panel
17
PTZ Control
Adjust iris, focus, and zoom of a PTZ camera
18
F2
Same as F2 button on front panel
DEV
ABC
1 2 3
4 5 6
7 8
0
9
DEF
GHI JKL MNO
PQRS TUV WXYZ
EDIT
A
REC PLAY
INFO
MENU
VOIP/MON
PREV
PTZ ESC
ENTER
F1
F2
IRIS FOCUS ZOOM
Troubleshooting Remote Control
Make sure batteries are properly installed
and that the remote is aimed directly at the IR
receiver on the front panel. If remote still does not
work properly, take the following steps:
1. Go to MENU > CONFIGURATION > GENERAL >
MORE SETTINGS.
2. Check and note NVR ID# (default is 255).
3. Press DEV on remote control.
4. Enter NVR ID# from step 2.
5. Press ENTER on remote control.
6. Check status indicator on front panel (blue =
remote is functioning properly).
NOTE
:
If status indicator does not turn blue and
remote does not respond, repeat steps
1 through 6 or contact device provider.
3
17
12
1 2
4
5
7
11
14
16
15
18
9
6
10
13
8