Use and Care Manual
Page 20
INITIAL SETUP
Protocol over Ethernet
The Protocol Over Ethernet (PoE) interface allows electrical
power and data to safely pass from Ethernet cables
to connected network cameras. This NVR allows up to
16 direct network PoE camera connections. If the PoE
interface is disabled, online network cameras can be
connected.
To add cameras with the PoE function, enter the Camera
Management interface: Menu > Camera > Camera.
NOTE
:
Fisheye cameras have five channels. When
connected to the NVR, the first fisheye channel
will be added automatically. The four other
channels can be added manually.
Adding and Connecting Cameras
Before you start
Connect network cameras via the PoE interfaces. If there are
three fisheye cameras, connect them to any PoE interfaces.
1. Click the button and select the adding method in
the dropdown list.
2. Change Plug-and-Play to Manual.
3. Input IP address, channel port, administrator user name
and password manually.
4. Click OK to add other channels.
NOTE
:
To add a second channel of the fisheye camera,
configure channel port to 2.