Use and Care Manual

Page 75
Configuring Quota Mode
To configure each camera with allocated quota for
the storage of recorded files and captured pictures.
Enter the Storage Mode interface:
Menu > HDD > Advanced.
1. Set Mode to Quota.
NOTE
:
Reboot the NVR to enable changes.
2. After the reboot, return to this screen and select a
camera.
3. Enter the storage capacity.
NOTE
:
Settings can be copied to other cameras if
needed by clicking Copy. Select the camera
to apply the settings to and click OK.
NOTE
:
You can also click the checkbox of IP
Camera to select all cameras.
4. In the next screen, click Apply.
NOTE
:
A quota setting of “0” means that all
cameras will use the total capacity of HDD f
or record and picture capture.
HDD MANAGEMENT