Use and Care Manual

Page 91
4. Click Login and enter the information from the previous step.
5. Enter Serial No. and Verification Code.
Find this in Configuration > System Info >
Device Info > Serial No. Choose just the middle
part of the number beginning from “4”.
This is the six-letter, all-uppercase custom
verification code previously created.
More Settings
To configure more settings, access the General Settings interface: Menu > Configuration > General > More Settings.
Once configured, click Apply.
ADDITIONAL INFORMATION
Setting Function
Device Name Edit the name of NVR
Device No. Edit serial number of NVR. The Device No. can be set in the range of 1-255. (Default is 255)
CVBS Output Brightness Adjust the video output brightness
Auto Logout Set timeout for menu inactivity.
Enable HDMI/VGA
Simultaneous Output
By default the video outputs from HDMI and VGA can be operated separately. Set the simultaneous output by
checking the option.
Menu Output Mode Choose the menu display on different video output: Auto, HDMI, VGA, and Main CVBS.