Use and Care Manual

Page 92
User Account Management
The Administrator is the default account for the NVR with a username of “admin” and a password of “12345”.
Administrator permissions allow the ability to add and delete users and to configure user parameters.
Adding a User
Access the User Management interface: Menu > Configuration > User and then click Add.
Enter the new user’s information, click Apply and then click OK.
Level options include Guest or Operator.
• By default, Operator can use two-way audio in remote configuration
and has all operating permission in camera configuration.
• By default, Guest only has permission for local/remote playback in
camera configuration.
The MAC address of the remote PC that logs into the NVR. If
configured and enabled, it only allows the remote user with this MAC
address to access the NVR.
Click OK to save the settings.
The new user will appear in this screen. Click the
button to enter permission settings.
ADDITIONAL INFORMATION