Use and Care Manual
Page 93
Set each configuration for the user and then click OK.
Local Configuration
• Local Log Search to search and view logs and system information
• Local Parameters Settings to configure parameters, restore factory defaults, and import/export configuration files (*only
Admin can restore factory defaults)
• Local Camera Management to add, delete, and edit IP cameras
• Local Advanced Operation to initialize HDD and set HDD properties, upgrade system firmware, and clear I/O alarm output
• Local Shutdown/Reboot to shutdown or reboot NVR
Remote Configuration
• Remote Log Search to remotely view logs on NVR
• Remote Parameter Settings to remotely configure parameters, restore factory defaults, and import/export configuration
files (*only Admin can restore factory defaults)
• Remote Camera Management to remotely add, delete, and edit IP cameras
• Remote Serial Port Control to configure RS-232 and RS-485 port settings
• Remote Video Output Control to send remote button control signal
• Two-Way Audio to realize two-way radio between remote client and NVR
• Remote Alarm Control to remotely arm and control alarm output
• Remote Advanced Operation to remotely initialize HDD and set HDD properties, upgrade system firmware, and clear I/O
alarm output
• Remote Shutdown/Reboot to remotely shutdown or reboot NVR
Camera Configuration
• Remote Live View to remotely view live video of selected camera(s)
• Local Manual Operation to locally start or stop manual recording, picture capture, and alarm output of selected camera(s)
• Remote Manual Operation to remotely start or stop manual recording, picture capture, and alarm output of selected
camera(s)
• Local Playback to locally play recorded files of selected camera(s)
• Remote Playback to remotely play recorded files of selected camera(s)
• Local PTZ Control to locally control PTZ movement of selected camera(s)
• Remote PTZ Control to remotely control PTZ movement of selected camera(s)
• Local Video Export to locally export recorded files of selected camera(s)
ADDITIONAL INFORMATION
NOTE
:
Only the admin user account has the permission of restoring factory default parameters.