Lost Item Finder with Built-in Bluetooth USER MANUAL SFA250 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4. Pair up to 5 x SFA250s with your iPhone, and independently monitor each device. 5. You can customize the preferences for each individually paired SFA250 linked to your iPhone (Alert tone, Icon, Alert tone loudness and Alert distant). Compatibility The “Find Stuff” app only works on iOS Bluetooth Smart Ready devices with Bluetooth v4.0, i.e. iPhone 4S/5/5C/5S, iPad 3/4/Mini/Air/Mini2, iPod Touch 5th generation.
2. Install the included battery (1 x CR1632) as follows, so the “+” side of the battery (side with printing on it) is facing up. 3. Replace the BATTERY COVER (#6) by lining up the arrow on the battery marking on the cabinet. Press down on the battery cover so it cover with the snaps into place. 4. Insert a coin or flat object into the slot on the battery cover, and rotate the BATTERY COVER (#6) clockwise, so the arrow on the battery cover goes from to locking it in place. BATTERY WARNING 1.
4. Pairing the SFA250 with your device. Press the BLUETOOTH BUTTON (#1) on the SFA250 once to enter into pairing mode. The LED INDICATOR (#3) will flash. Activate the Bluetooth function on your device, and click the “FindStuff” on your device to run the App. icon Follow the instruction on the App to add the SFA250 to your device. After pairing is completed, press the BLUETOOTH BUTTON (#1) or SEARCH BUTTON (#4) on the SFA250 to search for the device you are connecting to.
Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don’t expose the product to cold areas. It may damage the internal circuit board. Don’t try to disassemble the product as it may get damaged if you are not professional. Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.
accompanied by proof of the date of original consumer purchase, such as a duplicated copy of a sales receipt. You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There are no other express warranties other than those stated herein. This warranty is valid only in accordance with the conditions set forth below: 1.
