User's Manual

Smartbridge Mobile Software V1.2

Android

1. Launch the Marketplace (playstore) and search for “SmartBridge”.

2. Once the app is downloaded and installed, launch the app and enter your SmartBridge ID number.

Under the advanced tab you must enter the User Name and Password you set in the DVR under the

“Network User” accounts.

Note: Default Username is “abc” and default password is “123”.

3. You will now be logged in and be able to view your camera(s). Initially, the app will launch in Full

screen single camera mode. The mode can be switched to quad channel mode by double tapping the

screen, as shown below:

PAGE 1
Smartbridge Mobile Software V1.2 Android 1. Launch the Marketplace (playstore) and search for “SmartBridge”. 2. Once the app is downloaded and installed, launch the app and enter your SmartBridge ID number. Under the advanced tab you must enter the User Name and Password you set in the DVR under the “Network User” accounts. Note: Default Username is “abc” and default password is “123”. 3. You will now be logged in and be able to view your camera(s).
PAGE 2
4. Press the Button in the lower left to enter full screen quad channel mode. Here you will enter full screen quad channel mode to fit your screen. Slide your finger across to pan through additional channels (if applicable). 5. Press the in the lower left to exit the full screen quad channel mode.
PAGE 3
6. Pressing the “Left pointed” arrow on the right side of the screen will bring up the “Additional settings and options” menu for additional information or functionality.