Ergometer Guide

11
Trouble Shooting
1. IPM will not power on or display is blank.
Re-insert or change batteries.
2. Session will not begin with exercise
Check Sensor cable connection
Sensor gap is wrong
Check magnet ring is secure
Replace sensor if required
See your Technical Manual
3. IPM readings are erratic.
Check Sensor cable connection
Sensor gap is wrong
Check magnet ring is secure
Replace sensor if required
See your Technical Manual
4. Computer display is corrupt or frozen.
Disconnect USB and re-insert both batteries.
5. USB Device not detected
Ensure USB Diver is Installed
Try an alternative USB Port