Operation Manual

8
Assembly Instructions
STEP 1
Installing the Seat and Rear Leg to Seat Rail
Install the Rower Seat[3] onto the Seat Rail[2], as
shown, with seat indentation facing rearward.
2
STEP 2
Next, install Rear Bumpstop[7] on underside of the Seat
Rail using 2x M6 x 10mm Bolts[15]. Beveled edge must
face forward.
Underside of Seat Rail
Beveled edge facing forward
M6x10mm Bolts
Rubber Bumpstop
Seat Rail
Rower Seat
REQUIRED
Seat Rail [2]
Rower Seat [3]
REQUIRED
Rubber Bumpstop [7]
2 x M6 x 10mmBolts [15]