Operation Manual

18
Assembly Instructions – VX-2
STEP 3
Assemble Rower Seat
a) Install the Rower Seat[6] onto the rower frame using 4 x
M6x20mm Bolts[10] and 4 x M6 Washers[18] the seat
indentation must be facing towards the rear of machine.
9
3
6
b) Slide the assembled Seat Rails[2] facing in the direction of
the arrow in the above graphic. The seat indentation must
be towards the rear of the rower.
Rower Seat
Rower Seat Frame
REQUIRED
Rower Seat [6]
4 x M6x20mm Bolts [10]
4 x M6 Washers [18]
Note: Finished rower seat must be mounted exactly as
shown, resembling shape of the letter ‘Z’.
CAUTION
The Rower Seat[6] is heavy.
Use both hands and keep
fingers clear of the rower
channels when guiding the
seat down the seat rails.
Indentation
M6x20mm bolt
M6 Washer